1 1/2inch 500′ Non Oxygen Barrier Blue PEX Tubing for HEATING and Plumbing

This listing is for one roll of 500′ of 1 1/2 inch Non Oxygen PEX Barrier Tubing. – BHS PEX tubing is made to the following specifications. – OD 1.625ID 1.244Wall Thickness .19Weight per foot .35ASTM 876/877Not to be installed in Direct Sunlight – Made to ASTM specifications. – Rated at 100 psi at 180 degrees. – Rated at 80 psi at 200 degrees. – Rated at 160 psi at 73 degrees. – Type B PEX is made using the silane method (water bath). BHS PEX tubing is connected in 2 different ways. – Crimp fittings are the most effective way of connecting. This is done with a barbed fitting and a copper crimp ring. The ring is compressed with the use of a crimp ring tool. – This method is the cheapest and best way to a connection and is the least susceptible to leaks down the road. – You can also use push-fit fittings. They are great for a quick repair, or a small installation project. They are however more expensive and more susceptible to leaks down the road. – Do Notuse PEX tubing for any of the following applications. – Anywhere the temperature could reach 230 F or more. – Not for use with steam. – Keep out of direct sunlight. – Keep away from areas that are exposed to a flame or heat source.